The 8MCR is highly suitable as a basis for a verge/ditch mowing machine. The mowing boom can be assembled in 30 minutes, so the machine is also used out of the season in the green sector, contracting and earth and roadworks and hydraulic engineering. Also moves easily on an unstable surface. The unique weight distribution and 450-mm wide rubber tracks give the 8MCR a low ground pressure.
CAN BE USED ECONOMICALLY AND EFFICIENTLY ON MANY TERRAINS
Allows working further away or right up to the machine, also reaching over obstacles. The high pulling force guarantees a speed of approx. 10 km/h (6.5 mph). The cabin with large windows in combination with the low engine hood on the side and rear guarantee a good view of obstacles and the mower basket blade. The cabin with large windows in combination with the low engine hood on the side and rear guarantee a good view of obstacles and the mower basket blade.
Pick Up 2 Go
The solution to transport an 8MCR quickly is the Pick Up 2 Go transport system. In this way, the machine can be brought quickly from one job to another behind a tractor.
The system consists of a hydraulically operated wheel set on one side and a pick-up bar in the lifting device on the other side.
Fast and flexible transport of a crawler excavator without the use of a low-loader.
Saves a lot of time when working at multiple locations per day.
You do not need a parking space for the low-loader and the machine does not need to be loosened or secured.